1
2
C
ONTENTS
7.7
LOCAL INTERFACE (INTERFACE)
It defines the setup information for communication requirements over serial line connection.
No change is necessary because the initial value is used as is.
NOTE
Only when CR-LP414N/FL-IM2636N or FL-IM3543N is connected to CR-IR341 (A07 or
later) (including cases where it is connected as a backup printer), the setup value for "N1" in
the "2. LIF: siosetup.lp" file should be changed from "005" to "010".
009-051-05
11.20.99 FM2638
3
4
5
6
CR-IR341 Service Manual
7
8
9
10
MU - 55
MU - 55