FujiFilm CR-IR341 Service Manual page 169

C 1 2
ONTENTS
(2) Reading Preparation Sequence
This is for the operation of the subscanning unit.
It is the sequence of reading preparation during secondary erasure.
Fig. 3.3.2 Reading Preparation (Secondary Erasure)
Preprocessing: Fig. 3.3.1
Driving
shaft grip
(ST)
Table 3.3.2 Operation Parameters
Symbol
Conveyance (reading preparation)
PD36
TZ21 Driving shaft grip timeout
Lower limit for driving shaft grip spec
TZ22
Upper limit for driving shaft grip spec
TZ23
TZ34 Driven shaft grip timeout
009-051-04
05.31.99 FM2460
3 4 5 6
START
Conveyance driving
DRIVE (MD3/PD36)
Driving shaft grip driving
DRIVE (MZ2/ON)
TZ21 START
Timer START
Is SZ2 opened within TZ21?
N
Y
Driving shaft grip release stop
DRIVE (MZ2/OFF)
(hard)
Timer STOP
Timer > TZ23 or Timer <TZ22
Y
N
END
Description
(ST/HR)
(ST/HR)
(ST/HR)
(fast/slow)
CR-IR341 Service Manual
7 8 9 10
Driven shaft grip driving
DRIVE (MZ3/ON)
Is SZ3 closed within TZ34?
N
Y
Driven shaft grip stop
DRIVE (MZ3/OFF)
(hard)
03C9
Driving shaft grip stop
DRIVE (MZ2/OFF)
(soft)
Level 0 error
03C6
Driving shaft grip error
Error log (detailed information)
Timer data recording
Level 2 error
23C6
Driving shaft grip operation error
Value
-180 p
5 / 10 sec
1.6 / 3.3 sec
2.8 / 6 sec
2 / 10 sec
TR1H0048.EPS
MD - 106
Driven shaft grip stop
DRIVE (MZ3/OFF)
(soft)
Level 0 error
Driven shaft grip error
MD - 106
Driven shaft
grip driving
(fast)
FR1H0391.EPS