FujiFilm CR-IR341 Service Manual page 564

C 1 2
ONTENTS
5.9 Replacing Suction Cup Drive Motor (MB1)
(1) Rotate the timing belt until the IP removal unit is moved up (away about 250 mm from
the tray of the cassette set unit) to facilitate PB1 removal.
(2) Cut the cable clamp.
(3) Remove the bracket.
(4) Remove the cable clamp.
(5) Disconnect the connector (CNMB1).
(6) Remove the suction cup drive motor (MB1).
(7) Remove the timing belt from the MB1 so removed, and attach it to a new MB1.
CNMB1
009-051-04
05.31.99 FM2460
3 4 5 6
(1)
Timing belt
MB3
IP removal unit
(6)
MB1
(5)
Hex socket head bolts M4x12, x3
(7)
Timing belt wheel
E-ring
CR-IR341 Service Manual
7 8 9 10
(3)
Bracket
BR M4x8, x2
Timing belt
FR1H1067.EPS
MC - 73
(2)
Cable clamp
MB1
FR1H1767.EPS
MC - 73