FujiFilm CR-IR341 Service Manual page 837

1 2
C
ONTENTS
Detailed Explanation of Setup Items
Items that are not fully described in "List of Setup Items" are explained in detail below. They
should be referred to as needed.
"6. HN" (institution name)
Institution name displayed when "2. FNT" of SYSTEM is set to other than "0"
(Japanese).
"7. HP" (institution name in Kanji)
Institution name in Kanji displayed when "2. FNT" of SYSTEM is set to "0" (Japanese).
To enter an institution name in Kanji, the Shift-JIS code should be entered with every
four digits delimited by space.
It should be noted that if 15 characters of Shift-JIS space code (8140) are entered in
"7. HP" (institution name in Kanji), the institution name that is set in "6. HN" (institution
name) is displayed.
"13. TH" (trimming amount for mammo type)
The four sides of the IP image for HR is trimmed.
"14. TE" (trimming amount for other than mammo type)
The four sides of the IP image for ST is trimmed.
"15. CL" (date display type)
A display sample is indicated.
"17. FR1" (14"x17"/14"x14"/18*43 single image frame display)
The frame is not displayed if the format is misaligned.
"18. FR2" (18*43 twin/2-in-1 image frame display)
The frame is not displayed if the format is misaligned.
"20. CR" (compression ratio display switching)
Used to switch whether the compression ratio of the image is displayed or not during
image reoutput.
"21. MM" (margin designation switching)
Used to specify whether the margin is transparent or black.
• 0: The margin is either transparent or black depending on the image information.
When not designated in the image information, it is transparent by default.
• 1: The margin is either transparent or black depending on the image information.
When not designated in the image information, it is black by default.
• 2: Always transparent.
• 3: Always black.
"22. SG" (14x17/14x14 LP magnification mode)
Used to switch whether the output is magnified to 14"x17"/14"x14" LP before output.
Permission from the Service Headquarters is required before changing this parameter.
009-051-06
009-051-05
04.20.2001 FM3006
11.20.99 FM2638
3 4 5 6
CR-IR341 Service Manual
7 8 9 10
MU - 46
MU - 46