FujiFilm CR-IR341 Service Manual page 5

Safety Precaution
Safety Precaution
Observe the following safety precautions to avoid possible hazards and accidents during
installation and servicing.
1. General Precautions
Power Supply
• Be sure to turn OFF the power before servicing. If servicing is performed while the power
remains ON, you may experience electric shock, burn, or machine malfunction. Since
some parts are not fully discharged (such as the photomultiplier) or remain at high tem-
perature (such as the lamp) even after power OFF, exercise due care not to touch them.
If servicing procedures (such as voltage measurement) that cannot be performed under
power-OFF condition are to be performed, use due care to avoid electric shock and other
hazards, as instructed in this manual.
• To restart the machine, power it OFF and wait more than five seconds before powering it
ON again. If the machine is powered ON within five seconds, it may shut down due to
overcurrent/overvoltage protection.
Check on Drive Mechanisms
For your safety, be sure to turn OFF the power before proceeding with inspection or adjust-
ment. If inspection or adjustment that cannot be performed under power-OFF condition is to
be made, use due care, as instructed in this manual.
Heavy Objects
Get an assistant to help you during installation and removal of heavy objects. Also use
suitable gear or machinery when appropriate.
Safety Devices
For safety devices, such as fuses, breakers, interlock switches, panels, and covers, their
safety features should always be enabled. Do not make any alternation or modification that
may impair their functionality.
Fixing Adjustable Foot
As anti-vibration measures for the machine, fix its adjustable feet onto the floor in place.
009-051-07
08.30.2001 FM3115
CR-IR341 Service Manual
0.3_1
0.3_1