Table of Contents
Advertisement
C
1
2
ONTENTS
Push-In
CAUTIONS
• When removing and installing the units, exercise care not to damage the cables.
• When servicing any printed circuit board, be sure to wear an anti-static wristband to ensure
proper grounding. If not, static electricity built on the human body may cause damage to
electric parts mounted on the board.
(1) While pushing the stopper located on the front of the machine, put the scanner unit
back into the machine until the stopper located on the rear side of the machine is
activated.
(2) While pushing the stopper located on the rear side of the machine, put the scanner
unit all the way into the machine.
NOTE
When putting the scanner unit back where it was, use care so that it is not caught by
the connectors and cables disconnected.
Scanner unit
(1)
009-051-04
05.31.99 FM2460
3
4
5
6
Stopper
CR-IR341 Service Manual
7
8
9
10
(2)
Stopper
FR1H1558.EPS
MC - 108
MC - 108
Advertisement
Chapters
Table of Contents
