Removing And Reinstalling Side-Positioning Conveyor - FujiFilm CR-IR341 Service Manual

C 1 2
ONTENTS
8. Side-Positioning Conveyor
8.1

Removing and Reinstalling Side-Positioning Conveyor

Removal
CAUTION
When removing and installing the units, exercise care not to damage the cables.
(1) Pull out the scanner unit.
"7. Pulling Out and Pushing in Scanner Unit"
(2) Disconnect the connectors (CND1, BCRCN1, CNMD1-3).
(3) Remove the five screws that retain the side-positioning conveyor.
(4) Remove the side-positioning conveyor by taking it out in a horizontal direction.
NOTE
Make sure that the scanner unit has been pulled all the way out. If not, MD3 will
interfere with the machine frame when the side-positioning conveyor is removed.
Positioning screw
(should not be removed)
009-051-04
05.31.99 FM2460
3 4 5 6
CR-IR341 Service Manual
7 8 9 10
(4)
(2)
CND1
(2)
BCRCN1
MC - 110
Positioning screw
(should not be removed)
(2)
CNMD3
MD3
(2)
CNMD1, CNMD2
(3)
Side-positioning conveyor
BR M4x8, x5
FR1H1772.EPS
MC - 110