FujiFilm CR-IR341 Service Manual page 578

C 1 2
ONTENTS
Installation
(1) Insert the before-side-positioning conveyor along the rail into the machine.
Align the before-side-positioning conveyor against the positioning pin located on the
left side of the machine (into the machine as seen from the direction of insertion) and
against the positioning bracket located on the rear side of the machine.
(2) Secure the before-side-positioning conveyor in place with two mounting screws (BR
M4x8).
(3) Connect the connectors (CNC1, CNC2, CNSOLC1).
positioning conveyor
(3)
CNC1
(4) Attach the two timing belt to the timing belt wheel.
(5) Put the tensioner back where it was.
Loosen the two screws (BR M4x8) that retain the tensioner. Flick the timing belt two or
three times with your fingers to ensure that the belt snugly engages with the timing belt
pulley. Screw down the tensioner in place where a proper tension is attained.
"3.4 Tensioner Not Requiring Tension Adjustment" in Machine Description
009-051-04
05.31.99 FM2460
3 4 5 6
(2)
Before-side-
BR M4x8, x2
(3)
CNC2
(3)
CNSOLC1
CR-IR341 Service Manual
7 8 9 10
(1)
MC - 87
Positioning pin
Rail
Positioning bracket
FR1H1110.EPS
MC - 87