FujiFilm CR-IR341 Service Manual page 902

C 11 12
ONTENTS
2. CONFIGURATION DATA: To Save Machine Setup File to FD
(1) Select "2. CONFIGURATION DATA".
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO COPY CONFIGURATION FILES TO THE FD ?
1.YES 2.NO (DEFAULT=2) :
Meaning: Put a floppy disk into the floppy disk drive. Are you sure to copy the machine
(2) Put the floppy disk into the floppy disk drive, and select "1".
Coping to the floppy disk is initiated, with the following messages displayed as files
are copied to the floppy disk.
XXXXXXXXXX IS COPIED.
XXXXXXXXXX IS COPIED.
.
.
.
XXXXXXXXXX
Meaning: XXXXXXXXXX is copied.
When the floppy disk becomes full, the following message appears.
THE FD IS FULL. EXCHANGE OTHER ONE.
1.CONTINUE 2.CANCEL(DEFAULT=2) :
Meaning: The floppy disk is full. Replace it with another floppy disk.
Replace the floppy disk, and select "1".
Writing to the floppy disk continues, and once all the files are copied, the menu is
displayed.
For any file that cannot be written to the floppy disk, the following message appears.
FILE I/O ERROR. (FILE=XXXXXXXXXX)
XXXXXXXXXX denotes the file name.
The following files are saved to the floppy disk.
• IRSET.CFG
• FILMFMT.CFG
• IRSTATUS.CFG
009-051-05
11.20.99 FM2638
13 14 15 16
setup files to the floppy disk?
IS COPIED.
• IRSET.ORG
• FILMFMT.ORG
• IRSTATUS.ORG
CR-IR341 Service Manual
17
MU - 111
MU - 111