FujiFilm CR-IR341 Service Manual page 787

1 2
C
ONTENTS
2. Maintenance Utility Mode Transition Diagrams
The following diagrams show the mode transitions to the machine's maintenance utility
(abbreviated M-Utility).
2.1 Mode Transitions in Normal State
Transition caused by human
intervention
Automatic transition
(No human
intervention required)
IDT utility mode
(NOTE) Precaution about selection of "QUIT"
009-051-04
05.31.99 FM2460
3 4 5 6
Breaker OFF
User operation
User IDT operation
Service engineer
operation
Power switch OFF
The "QUIT" command works when the mode is switched from the utility mode to the maintenance
utility mode. If the mode is switched from the version display mode, the system does not transition
to the utility mode.
CR-IR341 Service Manual
7 8 9 10
Inactive
Breaker ON
Active
Power switch ON
OS boot mode
Version display mode
(5 sec)
Initialization process
mode
UTL icon
Routine process mode
Return key
End process mode
Special touch
Utility mode
Special touch
QUIT (NOTE)
Maintenance utility mode
Power switch OFF
MU - 4
FR1H1399.EPS
MU - 4