FujiFilm CR-IR341 Service Manual page 579

C 1 2
ONTENTS
6.2 Checking and Replacing Before-BCR IP Sensor (SC1)
Checks
(1) Remove the SC1 and spacer with the connector attached.
Before-side-positioning
Pan M3x10, x2
(1)
Connector
(2) Place the machine in an SC1 monitoring enabled state.
"2.2 Checking Various Sensors"
(3) Using a cardboard or the like, block the SC1 light path.
A message indicating that the sensor is CLOSE appears on the operation panel.
(4) Remove the cardboard or the like that has blocked the SC1 light path.
A message indicating that the sensor is OPEN appears on the operation panel.
(5) Repeat steps (3) and (4) several times.
(6) Power OFF the machine.
(7) Reinstall the SC1.
009-051-04
05.31.99 FM2460
3 4 5 6
conveyor
(1)
SC1
CR-IR341 Service Manual
7 8 9 10
(1)
Spacer
(tapered)
FR1H1769.EPS
MC - 88
MC - 88