FujiFilm CR-IR341 Service Manual page 895

C 11 12
ONTENTS
11.10 5. UNIT: 6. DRIVING GRIP: Operation Tests on
Subscanning Driving Grip Mechanism
1. GRIP: To Effect Driving Shaft Grip Operation
(1) Execute "1. GRIP".
The following message appears.
INPUT THE GRIP SPEED.
1. ST
2. HR
1 - 2 :
Meaning: Enter the grip speed.
(2) Type in either "1" or "2".
The following message appears.
MOVED TOWARD THE NIPPING POSITION IS IN PROGRESS.
DRIVE TIME : XXX
RESULT - OK
Meaning: Grip operation of the driving shaft is now being performed.
DRIVE TIME is displayed in units of 10 msec.
If it ends in error, "ERROR (XXXX)" appears. "XXXX" denotes an error code.
2. RELEASE: To Release Driving Shaft Grip
(1) Execute "2. RELEASE".
The following message appears.
INPUT THE RELEASE SPEED.
1. HIGH
2. LOW
1 - 2 :
Meaning: Enter the release speed.
(2) Type in either "1" or "2".
The following message appears.
MOVED TOWARD THE NON-NIPPING POSITION IS IN PROGRESS.
DRIVE TIME : XXX
RESULT - OK
Meaning: Grip operation of the driving shaft is now being performed.
DRIVE TIME is displayed in units of 10 msec.
If it ends in error, "ERROR (XXXX)" appears. "XXXX" denotes an error code.
009-051-05
11.20.99 FM2638
13 14 15 16
CR-IR341 Service Manual
17
MU - 104
MU - 104