FujiFilm CR-IR341 Service Manual page 841

1 2
C
ONTENTS
With items "36. FC1" through "36. FC4" of Film Setup, four types of area displays may
be set. For each of the types, up to eight MPM codes may be set.
For image data with MPM code that is not set, the setting of "35. FD1417" is used (for
14"x17").
SUPPLEMENTARY NOTE
A wildcard "?" may be used for one letter of a MPM code that may be set with items FC1
through FC4. "?" denotes any letter, from 0 to F.
Example) "123?"
How to set up
Position/rotation definition
Setup example)
FC1=0031:0123 1234 2345 3456 4567 5678 6789 789A
Area 0
Area 0 = position (0), rotation disabled (0)
Area 1 = position (3), 90¡ rotation enabled (1)
009-051-05
11.20.99 FM2638
3 4 5 6
Represents a MPM code, from 1230 to 123F.
0031 : 0123 1234 2345 3456 4567 5678 6789 789A
90¡ rotation for area 1 (0: disabled, 1: enabled)
Position of area 1 (0: upper left, 1: upper right, 2: lower left, 3: lower right)
90¡ rotation for area 0 (0: disabled, 1: enabled)
Position for area 1 (0: upper left, 1: upper right, 2: lower left, 3: lower right)
CR-IR341 Service Manual
7 8 9 10
MPM code (Up to eight codes may be set)
FR1B1247.EPS
MU - 50
FR1B1242.EPS
MU - 50