FujiFilm CR-IR341 Service Manual page 512

1 2
C
ONTENTS
(10) Upper front cover (BR M4x8, x2; truss M4x8, x2)
Loosen the right and left truss screws, and slightly pull the top of the cover toward
yourself to pull it up and out. Because the two screws on the upper portion of the cover
are BR M4x8, while the two screws on the lower portion are truss M4x6, use care not
to confuse these screws during installation.
(11) Stack table (truss M4x6, x2)
Using a 2-mm Allen wrench or so forth, first remove the screw covers and then the
screws.
(12) Lower front inner cover (BR M4x8, x8)
Because the topmost screw in the center is used to hook the lower front inner cover, it
should not be removed.
Lower front inner cover
(13) Multi-stage cassette loading cover (BR M4x8, x7)
Disconnect the connector (CNT1), and then pull the cover toward yourself and out.
009-051-04
05.31.99 FM2460
3 4 5 6
Screw used to hook
the lower front inner cover
FR1B1172.EPS
CR-IR341 Service Manual
7 8 9 10
CNT1
Multi-stage cassette
loading cover
BR M4x8, x6
FR1H1419.EPS
MC - 21
MC - 21