FujiFilm CR-IR341 Service Manual page 699

C
11 12
ONTENTS
11. After-Reading Conveyor
This section describes procedures for removing and reinstalling the after-reading conveyor,
and procedures for checking and replacing parts of the after-reading conveyor to be re-
placed.
Unless otherwise specified, it is assumed that covers that should be removed prior to checks
and replacement have been removed.
"3. Removing and Reinstalling Covers"
11.1 Removing and Reinstalling After-Reading Conveyor
Remove the after-reading conveyor with the scanner unit pulled out.
"7. Pulling Out and Pushing In Scanner Unit"
There are two types of the after-reading conveyor: old and new types. Removal and
reinstallation procedures for each specific type should be employed.
009-051-04
05.31.99 FM2460
13 14 15 16
Old type
CR-IR341 Service Manual
New type
Two screw retaining brackets are added.
A screw retaining stay is added.
MC - 208
FR1H1563.EPS
MC - 208