FujiFilm CR-IR341 Service Manual page 572

C 1 2
ONTENTS
Checking and replacing shock absorbers located on rear of IP removal unit
(1) Rotate the timing belt to move the IP removal unit up to the topmost position.
IP removal unit
(2) Remove from the rear of the machine the three screws that retain the shock absorber-
attached guide plate.
Vertical conveyor
(3) Take out the shock absorber-attached guide plate from the front of the machine.
(4) Check if the shock absorber is not peeled or frayed.
If it is peeled or frayed, replace the whole guide to which the shock absorber is at-
tached.
(5) Reinstall the shock absorber-attached guide plate.
For reinstallation, reverse the removal steps.
009-051-04
05.31.99 FM2460
3 4 5 6
CR-IR341 Service Manual
7 8 9 10
Timing belt
(1)
Rear of machine
MC - 81
Up-down IP
removal unit
FR1H1497.EPS
Rear of IP removal unit
(2)
Shock absorber-attached
guide plate
BR M4x8, x3
FR1H1483.EPS
MC - 81