FujiFilm CR-IR341 Service Manual page 424

1 2
C
ONTENTS
13AF
Preliminary steps:
1. Power OFF the machine and remove the covers.
2. Turn OFF the high-voltage switch (S1) of the SCN08A board.
3. Check for any foreign matter (lead character marking chips, etc.) inside the machine, and if any, remove it all.
Power OFF
Is the IDT connected properly to
the machine?
Make sure that the modular jack is
connected on the machine and
IDT sides as appropriate.
Power OFF
Is the cable connecting between
the machine and IDT normal?
Make sure that the cable is free of
defect.
Restart the machine
and check its status.
009-051-04
05.31.99 FM2460
3 4 5 6
N
Y
Y
N
Y
CR-IR341 Service Manual
Connect the IDT to the machine and execute it again.
Replace the connection cable.
MT - 155
FR1H0124.EPS
MT - 155