FujiFilm CR-IR341 Service Manual page 849

1 2
C
ONTENTS
7.9 HOSTS ADDRESS (HOSTS)
For all the hosts connected over the same network, their IP addresses should be set.
One host should be defined per line. Up to 127 hosts can be defined.
Format
IP Addr Host Name
" " denotes a space.
IP Addr (IP address)
An IP address is set in the form of "xxx.xxx.xxx.xxx", using numerals ranging from 0 to 255.
"xxx" denotes 0 through 255.
NOTES
• To one CR-IR341 machine, be sure to assign both a standard LAN IP address (CPU90E)
and a LAN board IP address (CPU90F).
Example) 172.16.0.1 fcr5000a
172.16.0.2 fcr5000a-1 ... CR-IR341#1 (CPU90F)
• Be sure to match the standard LAN IP address (CPU90E) and LAN board IP address
(CPU90F) to the IP addresses set in item No. 3 "IPS" and item No. 4 "IPI" of SYSTEM:
IRSET.CFG, respectively.
Host Name (host name)
A host name is set within 10 characters, using lowercase alphabets (a through z), numerals
(0 through 9), and hyphen (-).
NOTES
• If any alphabet is used in a host name, be sure to use lowercase letters.
• The initial letter of a host name should always be a lowercase alphabet.
009-051-05
11.20.99 FM2638
3 4 5 6
... CR-IR341#1 (CPU90E)
CR-IR341 Service Manual
7 8 9 10
MU - 58
MU - 58