FujiFilm CR-IR341 Service Manual page 886

C 11 12
ONTENTS
11.3 3. ACTUATOR: Operation Tests on Solenoids, Pumps, etc.
It is used during checking of the erasure lamp, FFM, etc.
1. NUMBER: To List Up No. of Erasure Lamp, FFM and Other Actuators
Execute "1. NUMBER".
A list of erasure lamps, FFM and other actuators is displayed as follows.
1:SOLA1
6:SVB1
11:FFM
2. DRIVE: To Drive Actuator
When "11: FFM" is selected
(1) Select "2. DRIVE".
The following message appears.
1:SOLA1
6:SVB1
11:FFM
INPUT THE NUMBER OF ACTUATOR.
1 - 11 :
Meaning: Enter the number of actuator.
(2) Type in "11".
The following message appears.
INPUT THE ROTATION DIRECTION.
1.CW 2.CCW (FIXED=X)
Meaning: Enter the rotation direction.
"X" denotes the rotation direction (either "1" or "2") that is currently set.
(3) Type in the rotation direction (either "1" or "2").
The following message appears.
INPUT THE SPEED.
1. STANDARD SUBSCANNING
2. RAPID SUBSCANNING
3. CARRY OUT
1 - 3(FIXED=X) :
Meaning: Enter the rotation speed.
"X" denotes the rotation speed (1: standard subscanning, 2: fast subscanning, 3:
ejection) that is currently set.
(4) Type in the rotation speed.
FFM is driven.
009-051-05
11.20.99 FM2638
13 14 15 16
2:SOLA2
7:SOLF1
2:SOLA2
7:SOLF1
CR-IR341 Service Manual
17
3:SOLA3 4:SOLA4
8:SOLC1 9:LAMP STB
3:SOLA3 4:SOLA4
8:SOLC1 9:LAMP STB
MU - 95
5:PB1
10:LAMP ON
5:PB1
10:LAMP ON
MU - 95