FujiFilm CR-IR341 Service Manual page 710

C 11 12
ONTENTS
Reinstallation
(1) Reinstall the erasure lamp assembly to the erasure conveyor.
CAUTION
Carefully handle the erasure lamp. If it is hit, the erasure lamp may be broken, so you
may get injured.
SUPPLEMENTARY NOTE
When installing the erasure lamp assembly, align the positioning pin located on the right-hand
side of the inlet into the hole of the erasure lamp assembly, and push it all the way into the
erasure conveyor.
(2) Connect the connectors (DCOUT 4, 5; ACOUT 1, 2).
Erasure conveyor
009-051-04
05.31.99 FM2460
13 14 15 16
CR-IR341 Service Manual
(2)
Power supply
DCOUT5
DCOUT4
ACOUT1
(1)
Erasure lamp assembly
BR M4x8
MC - 219
ACOUT2
FR1H1515.EPS
MC - 219