C
1
2
ONTENTS
(8) Remove the two screws (one of them should be merely loosened) that retain the shock
absorber-attached guide plate (A), and take out the shock absorber-attached guide
plate (A) from the stay.
(9) Loosen the two screws that retain the shock absorber-attached guide plate (B), and
take out the shock absorber-attached guide plate (B) from the stay.
(10) Remove the two screws (one of them should be merely loosened) that retain the shock
absorber-attached guide plate (C), and take out the shock absorber-attached guide
plate (C) from the stay.
(8)
Remove screw
BR M4x8
Stay
(8)
Loosen screw
Sems M3x6
(9)
Loosen screw
Sems M3x6, x2
(11) Attach new shock absorber-attached guide plates A, B, and C to the stay.
When installing the guide, tighten the screws while pushing the guide against the stay.
(12) Reinstall the roller assembly removed at steps (5) and (6).
(13) Hook the wire removed at step (4) into the groove of the roller.
(14) Attach the spring removed at step (3) to the wire.
009-051-04
05.31.99 FM2460
3
4
5
6
(8)
Shock absorber-attached guide plate (A)
(9)
Shock absorber-attached guide plate (B)
(10)
Loosen screw
Sems M3x6
CR-IR341 Service Manual
7
8
9
10
(10)
Remove screw
BR M4x8
(10)
Shock absorber-attached guide plate (C)
MC - 79
FR1H1429.EPS
MC - 79