FujiFilm CR-IR341 Service Manual page 810

1 2
C
ONTENTS
6.3 3. SAVE TO FD: Saving Error Log to Floppy Disk
Error log data and trace data is saved to a floppy disk.
(1) Select "3. SAVE TO FD".
The following messages appear.
0.QUIT
1.ERROR LOG
2.TRACE DATA (Overwrite trace data files having extensions ".001" through ".005"
3.IOT DATA
(2) Select the type of error log to be saved, using one of the numbers, 1 through 3.
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO SAVE ERROR LOGS TO THE FD?
1.YES 2.NO (DEFAULT=2) :
CAUTION
While a file is being saved, never power OFF the machine or press the FD eject button
because the floppy disk or floppy disk drive may be damaged.
(3) Put a floppy disk into the machine and select "1. YES".
The following message appears, with all the error logs saved to the floppy disk.
XXXXXXXXXX IS SAVED.
(XXXXXXXXXX represents the file name.)
If all the files cannot be contained in a single floppy disk, the following message
appears.
THE FD IS FULL. EXCHANGE OTHER ONE.
1. CONTINUE 2.CANCEL(DEFAULT=2):
Additionally, type in one of the following numbers and press the [ENT] key.
1.CONTINUE Continue to write the error log file to the floppy disk.
2.CANCEL
009-051-05
11.20.99 FM2638
3 4 5 6
(Exit the menu.)
(Overwrite an error log file onto the floppy disk.)
onto the floppy disk.)
(Save a file with a file name represented by the time it is saved, with
an extension ".IOT".)
Stop writing the error log file to the floppy disk.
CR-IR341 Service Manual
7 8 9 10
MU - 27
MU - 27