FujiFilm CR-IR341 Service Manual page 391

1 2
C
ONTENTS
03D7 Convergence Path Changeover Guide Operation Error
Cause
During erasure conveyance, the IP turns ON SF3, so that SC2 is turned ON, but both
SF3 and SC2 do not turn OFF.
Alternatively, SF3 turns OFF, but SC2 does not turn ON within a certain period of time.
Supplementary explanation
By the driving of MF1, the IP that was erasure conveyed completely passes over SF3.
(SF3: ON to OFF)
After the erasure is complete, SOLC1 is driven to effect path changeover in order to
convey the IP toward the cassette.
The IP conveyed from the erasure conveyor to the before-side-positioning conveyor
passes over SC2. (SC2: OFF to ON)
This error occurs when the IP does not completely pass over SC2 (SC2 status does
not transition from ON to OFF) during the above operation.
Sensor related
Error-related I/O locations
Convergence path
changeover guide drive
Convergence standby
IP sensor
Error-related system block diagram
AC IN
DC OUT2
JPS-1
DC OUT3
009-051-04
05.31.99 FM2460
3 4 5 6
ON: Close, OFF: Open
SOLC1
SC2
FR1H0081.EPS
SNS08A
CN
CN8
CN13
CN4
DRV03D
CN3
CNSOLC1
CN3
CN9
DRV08A
CN1
CR-IR341 Service Manual
CNF1
CNC1
SOLC1
FR1H0082.EPS
MT - 122
MT - 122