FujiFilm CR-IR341 Service Manual page 901

C 11 12
ONTENTS
12.3 3. BACKUP: Backing Up Various Data
Various setup files are written to a floppy disk.
1. SCANNER DATA: To Save Scanner Setup File to FD
(1) Select "1. SCANNER DATA".
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO COPY SCANNER DATA FILES TO THE FD ?
1.YES 2.NO (DEFAULT=2) :
Meaning: Put a floppy disk into the floppy disk drive. Are you sure to copy the scanner
(2) Put the floppy disk into the floppy disk drive, and select "1".
Coping to the floppy disk is initiated, with the following messages displayed as files
are copied to the floppy disk.
XXXXXXXXXX IS COPIED.
XXXXXXXXXX IS COPIED.
.
.
.
XXXXXXXXXX IS COPIED.
Meaning: XXXXXXXXXX is copied.
When the floppy disk becomes full, the following message appears.
THE FD IS FULL. EXCHANGE OTHER ONE.
1.CONTINUE 2.CANCEL(DEFAULT=2) :
Meaning: The floppy disk is full. Swap it for another floppy disk.
Swap the floppy disk, and select "1".
Writing to the floppy disk continues, and once all the files are copied, the menu is
displayed.
For any file that cannot be written to the floppy disk, the following message appears.
FILE I/O ERROR. (FILE=XXXXXXXXXX)
XXXXXXXXXX denotes the file name.
The following files are saved to the floppy disk.
• SCN_ELVL.DAT
• SCN_INT.DAT
• SCN_POLY.DAT
• SCN_SHDG.DAT
009-051-05
11.20.99 FM2638
13 14 15 16
data to the floppy disk?
• SCN_IFMT.DAT
• SCN_MAIN.DAT
• SCN_ISEN.DAT
CR-IR341 Service Manual
17
MU - 110
MU - 110