FujiFilm CR-IR341 Service Manual page 39

How Service Manual Is Organized
Reading the Maintenance Volume upon Failure Occurrence
When a failure (error) occurs in the machine, take appropriate remedial action depending on
the purpose.
• To achieve prompt machine recovery
"
• To analyze the error cause or prevent an error recurrence
"
• To check for improper operations
"
Remedies based on troubleshooting flows
"2.4 Troubleshooting Flows" in Troubleshooting
The "Troubleshooting Flows" section enables you to restore the machine to normal by
performing the procedures indicated by the flowchart that is related to the encountered
error (error code).
The steps to be performed are outlined below.
(1) Confirm the generated error code.
Note the error code displayed on the operation panel.
(2) Note the "Index" at the beginning of "Troubleshooting Flows" section and search for the
"recovery procedure" for the error code.
The recovery procedures are set forth in numerical order.
(3) Estimate the cause of the error, with reference to the "Cause" in the "Troubleshooting
Flows."
The "Troubleshooting Flows" describe the following information.
• Cause
• Error-related I/O locations
• Error-related system block diagram
(4) Restore the machine to normal by following the flow chart that is indicated in the
"Troubleshooting."
When replacing or adjusting parts, refer to the following sections.
• Replacement parts confirmation
"Service Parts List Volume"
• Parts replacement and adjustment
"Checks, Replacement and Adjustment of Parts"
SUPPLEMENTARY NOTES
• If the machine cannot be restored to normal by performing the specified procedures, report
the employed procedures and results to the Service Headquarters to make a request for
analysis.
• Even if the machine has been restored to normal by performing procedures other than those
which are set forth in the "Troubleshooting Flows," report the employed procedures, progress,
and results to the Service Headquarters. Such reports will be utilized for future service
manual improvement and machine serviceability enhancement.
009-051-04
05.31.99 FM2460
Remedies based on troubleshooting flows"
Remedies based on mechanical control flows"
Remedies based on descriptions of operations"
CR-IR341 Service Manual
0.34
0.34