FujiFilm CR-IR341 Service Manual page 779

C 11 12
ONTENTS
16.11 DRV08A Board
CAUTION
When servicing any printed circuit board, be sure to wear an anti-static wristband to ensure
proper grounding. If not, static electricity built on the human body may cause damage to electric
parts mounted on the board.
DRV08A Board
CN15
CN5
CN6
CN1
NFB12
CN14
CN10
CN8
How to Check Fuse
For no-fuse breaker (NFB)
The no-fuse breakers (NFB12) are to be shorted (ON) at factory prior to shipment and must
be so at installation. However, since they may unexpectedly turn OFF due to vibration during
transit, press all the no-fuse breaker buttons two or three times to ensure that they are
depressed to ON.
ON position OFF position
For directly-mounted fuse
With board version K or later, the no-fuse breaker (NFB) is replaced with the fuse.
"16.14 How to Check the Fuse on the Board"
009-051-06
009-051-04
04.20.2001 FM3006
05.31.99 FM2460
13 14 15 16
CN13
CN17 CN23 CN22 CN24
CN12
CN18 CN19 CN21 CN25
CN16
CN11
CN4
CN26
CN9
CN2
FR1H1353.EPS
CR-IR341 Service Manual
CN20
CN3
FR1H4044.EPS
MC - 284
MC - 284