Replacing Side-Positioning Conveyor Grip Release Timing Belt - FujiFilm CR-IR341 Service Manual

C 1 2
ONTENTS
8.11 Replacing Side-Positioning Conveyor Grip Release Timing
Belt
(1) Remove the side-positioning conveyor.
"8.1 Removing and Reinstalling Side-Positioning Conveyor"
(2) Remove MD2.
"8.6 Replacing Grip Release Motor (MD2)"
(3) Remove MD3 together with the bracket.
"8.7 Replacing IP Transport Motor (MD3)"
(4) Remove the single hex socket head bolt that retains the cam.
(5) Remove the single hex socket head bolt that retains the timing belt wheel.
(6) Pull out the shaft.
(7) Remove the timing belt.
T
O
P
T
O
P
(8) Install a new timing belt in reverse order of removal.
009-051-04
05.31.99 FM2460
3 4 5 6
(5)
Hex socket head bolt M4x12
Spring washer
Bushing
Timing belt wheel
(6) Shaft
CR-IR341 Service Manual
7 8 9 10
Bearing
(7)
Timing belt
MC - 126
Cam
Bushing
Spring washer
(4)
Hex socket head bolt
M4x12
FR1H1789.EPS
MC - 126