FujiFilm CR-IR341 Service Manual page 622

C 1 2
ONTENTS
8.14 Checking and Replacing Shock Absorbers of Side-
Positioning Conveyor
(1) Remove the side-positioning conveyor.
"8.1 Removing and Reinstalling Side-Positioning Conveyor"
(2) Remove the three shock absorber-attached guide plates.
(3) Check if the shock absorber is not peeled or frayed.
If it is peeled or frayed, replace the whole guide plate to which the shock absorber is
attached.
(2), (3)
Shock absorber-attached
(4) Reinstall the shock absorber-attached guide plates.
(5) Reinstall the side-positioning conveyor.
"8.1 Removing and Reinstalling Side-Positioning Conveyor"
009-051-04
05.31.99 FM2460
3 4 5 6
(2), (3)
Shock absorber-attached
Sems M3x6, x3
guide plate
Sems M3x6, x3
CR-IR341 Service Manual
7 8 9 10
(2), (3)
guide plate
MC - 131
Shock absorber-attached
guide plate
Sems M3x6, x4
Side-positioning
conveyor
FR1H1794.EPS
MC - 131