FujiFilm CR-IR341 Service Manual page 88

C 1 2
ONTENTS
Path Changeover during IP Load Conveyance
When the IP is erased during erasure conveyance, SOLC1 of the before-side-positioning
conveyor is energized to activate the path changeover guide. The IP is passed through the
guide with its path changed, and conveyed (returned) to the up-down IP removal unit.
After detection by the cassette inlet IP sensor SB2 (CLOSE
is deenergized, so that the conveyance path is changed over. A spring is attached to
SOLC1, so that upon deenergization, the spring force (tension) causes the guide to be
forcefully returned to its original position.
009-051-04
05.31.99 FM2460
3 4 5 6
SOLC1
SC2
IP path
Before-side-
positioning conveyor
Guide
SOLC1
OFF
SOLC1
SC2
Before-side-
positioning conveyor
CR-IR341 Service Manual
7 8 9 10
SC1
SC1
IP path
FR1H0214.EPS
MD - 25
Guide
SOLC1
ON
FR1H0213.EPS
OPEN), the SOLC1 energized
MD - 25