FujiFilm CR-IR341 Service Manual page 911

C 11 12
ONTENTS
5. CSL MENU DATA: To Read CSL Type Setup File from FD to HD
(1) Select "5. CSL MENU DATA".
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO COPY CSL MENU DATA FILES TO THE HD ?
1.YES 2.NO (DEFAULT=2) :
Meaning: Put a floppy disk into the floppy disk drive. Are you sure to copy the console
(2) Select "1".
Once the data is copied to the hard disk, the following message appears.
XXXXXXXXXX IS COPIED.
Meaning: XXXXXXXXXX is copied.
If the coping ends in error, the following message is displayed.
FILE I/O ERROR. (FILE=XXXXXXXXXX)
XXXXXXXXXX denotes the file name.
6. EDR PROCESSING DATA: To Read EDR Parameter File from FD to HD
(1) Select "6. EDR PROCESSING DATA".
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO COPY EDR PROCESSING DATA FILES TO THE HD ?
1.YES 2.NO (DEFAULT=2) :
Meaning: Put a floppy disk into the floppy disk drive. Are you sure to copy the EDR
(2) Select "1".
Once the data is copied to the hard disk, the following message appears.
XXXXXXXXXX IS COPIED.
Meaning: XXXXXXXXXX is copied.
If the coping ends in error, the following message is displayed.
FILE I/O ERROR. (FILE=XXXXXXXXXX)
XXXXXXXXXX denotes the file name.
The following files are read from the floppy disk to the hard disk.
• IRMUMN.PRM
• NNUMN.PRM
009-051-05
11.20.99 FM2638
13 14 15 16
menu data to the hard disk?
parameters to the hard disk?
• MPMUMN.PRM
• EDR.ABS
CR-IR341 Service Manual
17
MU - 120
MU - 120