FujiFilm CR-IR341 Service Manual page 282

1 2 3 4
C
ONTENTS
Code Name
0D20
Image data conversion error
0D30
DMA device open error
0D31
DMA transfer error
0D42
Image data transmission error
0D61
File read error
0D62
File format error
0D70
File format error
104A
Image file access timeout (for analysis)
Image file access timeout
104B
(for SCSI analysis)
Image file access timeout
104C
(for IMM analysis)
1103
Backup memory corruption
1113
HD image area uninitialized
009-051-06 009-051-04
04.20.2001 FM3006
05.31.99 FM2460
5 6
Significance/Occurrence Condition
An attempt to compress the image fails
An attempt to open the DMA device fails.
An hardware error occurs during DMA transfer.
A fatal error occurs during image data transmission.
An attempt to read the file fails.
The format of the file read is incorrect.
The configuration setting is out of spec.
A timeout occurs during image file access.
A timeout occurs during image file access. (The trace for
the SCSI task is added to the detail information.)
A timeout occurs during image file access. (The trace for
the IMM I/O task is added to the detail information.)
An error occurs during backup memory check.
An error occurs with the format data in the HD image area.
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy
Hardware error.
Insufficient memory
DMA hard error
• An internal process error occurs with dicom_send.
• A malloc error occurs with image information
conversion.
• A send error occurs with sendPixelData.
• A timeout error occurs with sendPixelData.
• A select error occurs with sendPixelData.
• Internal process error
• Task generation error
• Task deleted
• Message queue generation error
Faulty HDD, MTH board, etc.
Faulty HDD, MTH board, etc.
The configuration setting is improper.
Faulty HDD, MTH board, etc.
Faulty HDD, MTH board, etc.
Faulty HDD, MTH board, etc.
• The backup memory is not yet initialized during
bootup immediately after installation.
• The backup memory is corrupted.
• The image data area in the HD is not yet formatted
during bootup immediately after installation.
• The format data in the image area of the HD is
corrupted.
MT - 23
Detail Refer to
G-1
C
C
G-2
O
O
P
e-6
e-6
e-6
F
F
TR1H1237.EPS
MT - 23