FujiFilm CR-IR341 Service Manual page 363

C 1 2
ONTENTS
03B9 Load Standby Remaining IP Ejection Error
Cause
Because SF3 is turned ON during initialization, the IP is conveyed toward the cassette,
but SB2 does not turn ON. (When 03B9 occurs, the cause of the IP jam should be
checked and remedied.)
Supplementary explanation
During initialization, each motor is activated, and each sensor is used to search for any
remaining IP left in the machine.
A remaining IP is detected by SF3 of the erasure conveyor.
In order to execute the IP ejection process, the IP is conveyed from the erasure con-
veyor toward the up-down IP removal unit by the driving of MF1, MC1, and MB2.
The IP is conveyed to the up-down IP removal unit, and it passes over SB2. (SB2:
OFF to ON)
This error occurs when the IP fails to pass over SB2 (SB2 status does not transition
from OFF to ON), or when it does not completely pass over SB2 (SB2 status does not
transition from ON to OFF), during the above operation.
Sensor related
Error-related I/O locations
Cassette inlet IP sensor
Error-related system block diagram
AC IN
DC OUT2
JPS-1
DC OUT3
009-051-04
05.31.99 FM2460
3 4 5 6
ON: Close, OFF: Open
SB2
CNB1
SNS08A
CN
CN13
CN4
DRV03D
CN3
CNF1
CNB3
CN3
CNC2
DRV08A
CN1
CNF2
CR-IR341 Service Manual
MF1
IP transport motor
MB2
IP transport motor
MC1
IP transport motor
CNB2
CNMB2
MB2
CNMC1
MC1
MF1
FR1H0031.EPS
MT - 94
SOLA3
SF3
SOLA4
Load standby
IP sensor
FR1H0030.EPS
MT - 94