FujiFilm CR-IR341 Service Manual page 295

C 1 2 3 4
ONTENTS
Code Name
2400
File open error
2403
File read error
2423
DSP4 image processing error 2
2480
EDR data transmission designation error
2481
Connection establishment error
2482
EDR data transmission error
2490
Menu replacement error
009-051-06
04.20.2001 FM3006
5 6
Significance/Occurrence Condition
An attempt is made to open a file, but it cannot be opened.
A file cannot be read.
Because an error occurs in image processing during reading,
reading is retried.
When the EDR backup data is transferred during read,
the target host name for the EDR data is not set. Or the
host name format is improper.
When the EDR backup data is transferred during read,
a connection with the target for the EDR data cannot be
established.
When the EDR backup data is transferred during read, the
connection is disconnected during EDR data transfer.
The ID information is acquired after the start of read, and,
because its menu code is not yet registered in the machine,
it is replaced with a default menu code.
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy
• The file is absent in the HDD.
• The file in the HDD is corrupted.
• The HDD itself is faulty, etc.
HDD, MTH08A board
Faulty IMG07B, MTH board, etc.
Check the setup value in the configuration file.
Check the network-connected units.
Check the network-connected units.
Check if the menu code has been registered.
MT - 33.1
Detail Refer to
E-1
E-1
E-2
E-4
E-7
E-7
E-8
TR1H1320.EPS
MT - 33.1