FujiFilm CR-IR341 Service Manual page 284

1 2 3 4
C
ONTENTS
Code Name
13B8
IP position information error
13E1
Feed IP suction error
13E2
Feed IP dropped
13E3
Feed IP grip error
13E4
Load IP suction error
13E5
Load IP dropped
13E9
IP leak error
1490
Menu unregistration error
1533
Laser power insufficient error 1
ID acquisition request response wait
1711
timeout/line failure
1712
ID unregistration received
ID acquisition request response wait
1721
timeout/line failure
1722
ID unregistration received
009-051-06 009-051-04
04.20.2001 FM3006
05.31.99 FM2460
5 6
Significance/Occurrence Condition
A leak error occurs during IP loading.
The ID information can be acquired before read, but
its menu code is not yet registered in the machine.
With initial laser power status check, an insufficient
power is detected.
Serial-connected IDT:
• While waiting for a response at the time of ID acquisition
request, a timeout occurs.
• A line failure occurs.
The ID information is not yet registered.
Serial-connected IDT:
• While waiting for a response at the time of ID acquisition
request, a timeout occurs.
• A line failure occurs.
The ID information is not yet registered.
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy
Check to ensure that the menu code has been
registered.
Scanner hardwareis failure.
• A failure occurs on the IDT.
• The SMCU driver is faulty.
Register the ID information
• A failure occurs on the IDT.
• The network environment is faulty.
Register the ID information.
MT - 25
Detail Refer to
MD - 136, 142,
D-5
MT - 92
MD - 68, 110,
D-5
MT - 156
MD - 69, 111,
D-5
MT - 158
MD - 70, 112,
D-5
MT - 160
MD - 100, 113,
D-5
MT - 162
D-5
MD - 101, 114
D-5
E-8
E-3
F
I
F
J
TR1H1239.EPS
MT - 25