FujiFilm CR-IR341 Service Manual page 799

C 1 2
ONTENTS
4.ELECTRICAL UTILITY
0.QUIT
1.ERASURE LAMP TEST : Conducts an erasure lamp illumination test.
2.IMAGE MEMORY TEST : Conducts an image memory capacity diagnostic check
3.DSP TEST : Performs self-diagnostic checks of all the image processing boards mounted
4.LAN : Conducts network-related diagnostic checks.
0.QUIT
1.ETHERNET MAC ADDRESS : Displays the Ethernet MAC addresses of the CPU90E
2.PING : Executes "ping" by designating the LANC used (CPU90E or CPU90F) and the host
3.CPU90F DMA : This menu should not be used.
5.HDD: Conducts hard disk drive diagnostic checks.
0.QUIT
1.WRITE-READ VERIFY : Writes 1 Kbytes of monotonously increasing data onto the hard
6.FDD: Conducts floppy disk drive diagnostic checks.
0.QUIT
1.WRITE-READ VERIFY : Writes 1 Kbytes of monotonously increasing data onto a floppy
NOTE: Numerals in brackets denote a relevant chapter in this manual.
009-051-07
08.30.2001 FM3115
3 4 5 6
: Conducts electrical-related diagnostic checks on the erasure lamp,
image memory, image processing board, etc.
and marching test.
in the machine.
name of its connection designation (or IP address).
disk, and reads it back to verify that the written data and read
data agree with each other.
disk, and reads it back to verify that the written data and read
data agree with each other.
CR-IR341 Service Manual
7 8 9 10
and CPU90F.
MU - 16
[9.]
[9.1]
[9.2]
[9.3]
[9.4]
[9.5]
[9.6]
FR1H1385.EPS
MU - 16