FujiFilm CR-IR341 Service Manual page 803

C 1 2
ONTENTS
6.DRIVING GRIP : Performs operation tests on the subscanning driving grip
0.QUIT
1.GRIP
2.RELEASE
3.D/A DATA
7.DRIVEN GRIP : Performs operation tests on the subscanning driven grip
0.QUIT
1.GRIP
2.RELEASE
3.D/A DATA
8.MIRROR UP/DOWN : Not functional with CR-IR341.
7.FILE UTILITY
: Performs file-related operations such as saving parameter files to and
reading data from floppy disks. Used when the configuration data is
edited on a personal computer or when optional software is installed.
0.QUIT
1.FORMAT FD : Formats a floppy disk according to the 1.44MB MS-DOS format.
2.FORMAT IMAGE PARTITION : Formats an image storage partition of the hard disk.
3.BACKUP : Writes each setup file to a floppy disk.
0.QUIT
1.SCANNER DATA : Saves the scanner setup files to a floppy disk.
2. CONFIGURATION DATA: Saves setup files (IRSET.CFG, FILFMT.CFG) to a floppy disk.
3. NETWORK DATA: Saves network-related setup files (RMT_SW.CFG, EQUIP, DEVICE,
4.IMAGE PROCESSING DATA : Saves image processing parameter files to a floppy disk.
5.CSL MENU DATA : Saves to a floppy disk the setup files related to CSL type
6.EDR PROCESSING DATA : Saves EDR parameter files to a floppy disk.
4.RESTORE : Reads each setup file from the floppy disk to the hard disk.
0.QUIT
1.SCANNER DATA : Reads the scanner setup files from a floppy disk to the hard disk.
2. CONFIGURATION DATA: Reads setup files (IRSET.CFG, FILFMT.CFG) from the floppy
3. NETWORK DATA: Reads network-related setup files (RMT_SW.CFG, EQUIP, DEVICE,
4.IMAGE PROCESSING DATA : Loads image processing parameter files from a floppy
5.CSL MENU DATA : Loads the setup files related to CSL type menu screens and magnetic
6.EDR PROCESSING DATA : Reads EDR parameter files from a floppy disk to the hard disk.
5.EDR DATA
0.QUIT
1.PARAMETER ONLY(SAVE TO FD) : Saves to a floppy disk the EDR intermediate processing
2.FULL(SAVE TO FD) : Saves to a floppy disk the EDR intermediate processing parameter files
3.PARAMETER ONLY(SAVE TO HD)
4.FULL(SAVE TO HD)
5.DELETE EDR BACKUP FILES ON HD
6.PREVIOUS SYSTEM SOFTWARE: Reverts back to the immediately preceding
7.EXECUTION : Loads a designated file from a floppy disk and executes it.
Used when optional files are installed.
NOTE: Numerals in brackets denote a relevant chapter in this manual.
009-051-07
08.30.2001 FM3115
3 4 5 6
mechanism. Displays a message if any abnormality is
encountered.
mechanism. Displays a message if any abnormality is
encountered.
HOSTS, CODEDSTB, ROUTE, NETMASKS, Base on DICOM) to a
floppy disk.
menu screens and magnetic card formats.
disk to the hard disk.
HOSTS, CODEDSTB, ROUTE, NETMASKS, Base on DICOM) from
the floppy disk to the hard disk.
disk to the hard disk.
card formats from a floppy disk to the hard disk.
parameter files for images stored in the hard disk.
and EDR reduced-image data for images stored in the hard disk.
Setting for remote maintenance
version of system software.
CR-IR341 Service Manual
7 8 9 10
MU - 20
[11.10]
[11.11]
[11.12]
[12.]
[12.1]
[12.2]
[12.3]
[12.4]
[12.5]
[12.6]
[12.7]
FR1H1390.EPS
MU - 20