FujiFilm CR-IR341 Service Manual page 172

C 1 2
ONTENTS
4. Step Operation
4.1 Summary of Operation
The step operation is performed in the Service Menus and Maintenance Utility at the time of
troubleshooting and machine adjustment.
The following step operations may be performed.
1. Feed/load step operation
2. Side-positioning step operation
4.2 Feed/Load Step Operation
(1) Overall/General Sequence
This operation is to check the IP handling at the cassette set unit and IP removal unit.
At each step, the process halts to accept an input, and then the next step is performed.
From "6. MECHANICAL UTILITY" of the Maintenance Utility menus, select either feed or
load step operation and execute it.
Fig. 4.2.1 Feed/Load Step Operation
START
Fig. 4.2.2
Fig. 4.2.3
END
009-051-04
05.31.99 FM2460
3 4 5 6
Feed step operation
Wait for step input
IP positioning
Wait for step input
Load step operation
FR1H0393.EPS
CR-IR341 Service Manual
7 8 9 10
See Section 4.2.
See Section 4.3.
MD - 109
MD - 109