FujiFilm CR-IR341 Service Manual page 947

11 12
C
ONTENTS
(4) Remove the "INSTALL" system disk, and insert data disk #1 into the floppy disk drive.
As indicated in the example below, messages appear to indicate that software files
are copied to the hard disk.
Copy </fd0/bootrom.sys> To </sd0/TEMP/BOOTROM.SYS>
Copy </fd0/vxworks.st> To </sd0/TEMP/VXWORKS.ST>
Copy </fd0/version.dat> To </sd0/TEMP/VERSION.DAT>
Copy </fd0/script.txt> To </sd0/TEMP/SCRIPT.TXT>
......
......
Insert next data floppy disk.
(5) Insert the remaining data disks in numerical order.
As indicated in the example below, messages appear to indicate that software files
are copied to the hard disk.
Create </sd0/LOG/CORE.DMP>
Create </sd0/LOG/IOT.001>
Create </sd0/LOG/TCB.001>
Create </sd0/LOG/ISC.001>
......
......
Upon completion of log file initialization, the following message appears to indicate the
end of installation.
Install is complete.
009-051-05 009-051-05
11.20.99 FM2638 (1)
11.20.99 FM2638
13 14 15 16
CR-IR341 Service Manual
17
MU - 156
MU - 156