FujiFilm CR-IR341 Service Manual page 129

C 1 2
ONTENTS
Fig. 2.3.3 Elevation Unit HP Positioning (2/2)
HP positioning preparation
operation Sensor SB3 is
engaged with the actuator
for topmost shelf detection.
Operation
for
elevation
edge
detection
preparation
Sensor SB3
detects the edge
(lower end)
of the actuator for
HP positioning.
Operation
for
elevation
edge
detection
Moved by 60p to the center of
the actuator, which corresponds
to the home position of the
up-down IP removal unit
(travel: 1.5 mm).
009-051-04
05.31.99 FM2460
3 4 5 6
A
Elevation unit movement UP
DRIVE (MB3/PB101)
Is SB3 closed within TB103?
N
Y
Elevation unit movement stop
DRIVE (MB3/OFF) (Soft)
Elevation unit movement DOWN
DRIVE (MB3/PB102)
Is SB3 opened within TB104?
N
Y
Elevation unit movement stop
DRIVE (MB3/OFF) (Soft)
1-pulse driving process Parameter
Elevation unit movement UP (to edge)
DRIVE (MB3/PB103)
Is SB3 closed within TB105?
N
Y
MB3 phase start-point
forced return (2-phase)
Elevation unit movement UP (to HP)
DRIVE (MB3/PB104)
Is SB3 closed?
N
Y
END
CR-IR341 Service Manual
7 8 9 10
Table 2.3.3 Operation Parameters
Symbol
PB100
Elevation (initial driving)
PB101
Elevation (UP)
PB102
Elevation (DOWN)
PB103
Elevation 1-pulse driving (edge movement)
PB104
Elevation (HP movement)
TB17
Wait for next operation
TB101
Elevation reference seek timeout 1
TB102
Elevation reference seek timeout 2
TB103
Elevation topmost shelf seek timeout 1
TB104
Elevation topmost shelf seek timeout 2
TB105
Elevation HP 1-pulse driving timeout
NB100
Elevation HP retry
Elevation unit movement stop
DRIVE (MB3/OFF)
(Soft)
Level 0 error
03DE
Elevation unit movement error
Level 2 error
23DE
Elevation shelf movement failure retray
Is the number of retries made greater
than the retry count (NB100)?
N
Y
Level 0 error
03DE
Elevation shelf movement error
MD - 66
Description
Value
1 p
+ infinite P
- infinite P
1 p
60 p
0.1 sec
14.5 sec
2.4 sec
2.4 sec
2.4 sec
20 sec
2 times
TR1H0017.EPS
FR1H0314.EPS
MD - 66