FujiFilm CR-IR341 Service Manual page 216

C 1 2
ONTENTS
6. Error Handling
6.1 Error Handling: Cassette Ejection 1
(1) Overall/General Sequence
In this sequence, an error IP is returned to the
cassette.
The next IP processing is initiated upon return of
the error IP to the cassette.
Corresponding sequences
Fig. 2.4.2 Feed Suction
Fig. 4.2.2 Feed Step Operation (1/3)
Fig. 6.1.1 Error Handling: Cassette Ejection 1
At the time when the error IP is
returned to the cassette, an
elevation permission is issued to
start the processing for the next IP
in the queue.
At the same time, removal of the
cassette for the error IP is notified
to the user.
Cassette ejection
Same as in the
routine described
in Fig. 2.11.1.
If hold release
error occurs
during cassette
ejection,
degeneration
takes place for
the relevant shelf.
009-051-04
05.31.99 FM2460
3 4 5 6
Preprocessing: Fig.2.4.2, and Fig. 4.2.2
START
Elevation permission issued
Error message output
***
Alarm disabled
Cassette removed
Cassette hold release
Fig.2.2.2
LEDT2 is turned on
Cassette removal
Is SA1 opened?
N
Y
DELAY TA13
Is SA2 opened?
N
Y
LEDT2 is turned off
LEDT1 is turned on
END
CR-IR341 Service Manual
7 8 9 10
Table 6.1.1 Operation Parameters
Symbol
Wait for cassette OUT
TA13
Table 6.1.1a List of I/O Names Used in the Flow and Drawing
I/O name
in flow
SA1
SA2
LEDT1
LEDT2
This elevation permission allows
the process to start.
The cassette
removable condition
is indicated.
Operation performed
by the operator
Instant return of
cassette is supported.
The ready condition
is indicated.
Return to normal routine
MD - 153
Description
I/O name
Topmost
2nd shelf 3rd shelf
shelf
position position
position
SA1 SA5 SA9
SA2 SA6 SA10
LEDT1 LEDT3 LEDT5
LEDT4 LEDT6
LEDT2
If there is another IP
in the machine, up-download
load.
If there is any unprocessed
cassette, up-down feed
feed.
FR1H0440.EPS
MD - 153
Value
0.5 sec
TR1H0092.EPS
4th shelf
position
SA13
SA14
LEDT7
LEDT8
TR1H0093.EPS