FujiFilm CR-IR341 Service Manual page 203

C 1 2
ONTENTS
5.6 Processing of Before-Reading Standby IP
(1) Overall/General Sequence
Fig. 5.6.1 Processing of Before-Reading Standby IP (1/2)
N
Y
IP determining
SB4 CLOSE
It is checked that
it is for lateral (width)
It is checked that it is
metric size.
for lateral (width) inch size.
009-051-04
009-051-05
05.31.99 FM2460
04.20.2001 FM3006
3 4 5 6
Preprocessing: Fig. 5.1.1
START
N
Y
N
Y
DELAY TB76
Is SB4 closed?
Load conveyance UP direction stop
DRIVE (MB2/OFF) (soft)
DRIVE (MC1/OFF) (soft)
DRIVE (MD3/OFF) (soft)
IP determining
SB4 CLOSE
DELAY TB76
Suction cup
movement is
not executed.
A
CR-IR341 Service Manual
7 8 9 10
IP search and comparison
Fig. 5.6.2
Any remaining IP?
Up-down load movement
Fig. 2.8.1
Feed conveyance UP direction
DRIVE (MB2/PB72)
DRIVE (MC1/PC72)
DRIVE (MD3/PD72)
Is SB2 closed and is SC1 opened within TB75?
IP length measurement
Fig.2.5.2
Side-positioning conveyance
Fig.2.6.3
Side-positioning
Fig.2.6.4
MD - 140
SB2: Cassette inlet IP sensor
SC1: Before-BCR IP sensor
SB2:OPEN CLOSE
SC1:CLOSE OPEN
Feed conveyance UP direction stop
DRIVE (MB2/OFF) (soft)
DRIVE (MC1/OFF) (soft)
DRIVE (MD3/OFF) (soft)
Level 0 error
Feed/load conveyance remaining
03B6
ejection error
If the size of the IP
being initialized is
out of spec, level 0
error occurs.
FR1H0425.EPS
MD - 140