FujiFilm CR-IR341 Service Manual page 168

C 1 2
ONTENTS
3.2 Side-Positioning (Secondary Erasure)
(1) Overall/General Sequence
Unlike in the routine (single-IP conveyance), the barcode reading is not performed.
Fig. 3.2.1 Side-Positioning (Secondary Erasure)
(Overall Sequence)
This step is skipped in the secondary erasure.
The barcode located on the back of the IP is
read during the IP conveyance.
Same as in the routine
For 14"x17" and 14"x14", reverse conveyance
is performed before side-positioning to position
the leading edge of the IP.
Same as in the routine
The start point for reading, which is the next
sequence, is located.
Same as in the routine
3.3 Reading (Secondary Erasure)
(1) Overall/General Sequence
The sequence of reading preparation and reading conveyance is different than in the routine
(single-IP conveyance).
Fig. 3.3.1 Reading (Overall Sequence)
Different than in the routine
Preparation prior to IP reading
Different than in the routine
The IP conveyed is scanned.
Same as in the routine
009-051-04
05.31.99 FM2460
3 4 5 6
Preprocessing: Fig. 3.1.1
CR-IR341 Service Manual
7 8 9 10
Preprocessing: Fig. 3.1.1
START
Barcode reading
Side-positioning
conveyance
Fig.2.6.3
Side-positioning
Fig.2.6.4
CSL/IDT
information check
Fig.2.6.6
END
START
Reading preparation
Fig.3.3.2
Reading
Fig.3.3.3
CSL/IDT information
check 2
Fig.2.7.7
END
FR1H0390.EPS
MD - 105
FR1H0389.EPS
MD - 105