FujiFilm CR-IR341 Service Manual page 457

C 1 2
ONTENTS
No. 207 Improper film characters (2)
• Although the film characters, border, and image
are outputted normally, only a portion of film
characters consisting of Japanese text is disturbed.
Halos
No. 208
• Multiple halos are developed outside the proper
contour of the image.
009-051-04
05.31.99 FM2460
3 4 5 6
CR-IR341 Service Manual
<Probable Cause>
• The CPU90E board and/or MTH08A board is
faulty.
<Check and Reference>
• Reset the machine, or power OFF the machine
and then back ON again, to perform self-
diagnostics during machine initialization. If the
results of the self-diagnostics indicate an error,
replace the relevant board.
"Replacing and Adjusting CPU90E Board"
<Probable Cause>
• Any of the SCN08A, IMG07B, IMG08A, IMG08B,
IMG08C, and MTH08A board is faulty or image
signal cable on the board is faulty.
<Check and Reference>
• Reset the machine, or power OFF the machine
and then back ON again, to perform self-
diagnostics during machine initialization. If the
results of the self-diagnostics indicate an error,
replace the relevant board and cable.
"SCN08A Board"
MT - 188
FR1H1866.EPS
FR1H1867.EPS
MT - 188