FujiFilm CR-IR341 Service Manual page 305

C 1 2 3 4
ONTENTS
Code Name
2991
File open error
2992
File write error
2993
File close error
2994
SMCU driver hard error
2994*
SMCU error
2A00
File open error
2A01
File format error
2A02
File setup value error
2A10
Magnetic card reader inoperative
*: A06 or later
009-051-04
05.31.99 FM2460
5 6
Significance/Occurrence Condition
An attempt to open the log file fails.
An attempt to write the log file fails.
An attempt to close the log file fails.
An error status is returned by the SMCU driver.
An attempt is made to open a file, but it cannot be opened.
The file format is improper.
The data of the file is improper.
The magnetic card reader is inoperative with the machine
configuration that uses the magnetic card reader.
CR-IR341 Service Manual
Detail: Denotes the detail information format.
Probable Cause/Remedy
• The file in the HD is corrupted.
• HD failure
• The file in the HD is corrupted.
• HD failure
HD failure
SMCU failure. Replace the DMC08A board.
• The file is absent in the HDD.
• The file in the HDD is corrupted.
• The HDD itself is faulty, etc.
• The file format in the HDD is improper.
• The file in the HDD is corrupted.
• The HDD itself is faulty, etc.
• The data described in the file in the HDD has an
out-of-range value.
• The file in the HDD is corrupted.
• The HDD itself is faulty, etc.
SNS08A board, magnetic card reader
MT - 42
Detail Refer to
A-1
A-1
A-1
A-1
E
K-1
K-1
K-1
K-2
TR1H1256.EPS
MT - 42