FujiFilm CR-IR341 Service Manual page 844

1 2
C
ONTENTS
7.6 EQUIPMENT (EQUIP)
It sets to determine which HOST is requested to process filing function, display function,
print function, and ID information acquisition function.
Format
Function HostName (
" " denotes a space.
Function (function)
Function requested for the host that is set in "HostName (host name)".
• "OD_FILE" Filing function
• "DISPLAY" Display function
• "PRINT"
• "IDT"
HostName (host name)
A host that is responsible for the function specified by "Function (function)" may be set.
If multiple hosts are set with "IDT", the host that is first set is used preferentially. The next
host will be used when its immediately preceding host experiences failure or any other
trouble.
If multiple units are connected with "PRINT", "OD_FILE", and "DISPLAY", the output designa-
tion can be designated by user setting.
With the CR-IR341, the number of hosts that may be set for one function is restricted as
follows.
• IDT
• PRINT
• Other
It should be noted that the setup for HostName (host name) is as follows.
• LOCAL
A host connected over an E-I/F or serial line. It is designated when direct connection
is to be established.
• LOCAL_S
A host connected over an E-I/F or serial line. It is designated when direct connection
is to be established. Note, however, that high-resolution data transfer is not sup-
ported.
• LOCAL_R
It is designated when print output is to be provided only during reoutput, without
generating printout during reading.
During reading, images are transferred only to the HIC/QA-WS, where image checks/
adjustments are performed, and then they are routed from the HIC/QA-WS, to the
CR-IR341, and to the printer for reoutput.
NOTE
No output can be generated directly to the printer from the CR-IR341 where
"LOCAL_R" setting is made.
009-051-07
08.30.2001 FM3115
3 4 5 6
HostName
Print function
ID information acquisition function
Up to five IDTs
LOCAL and one host name, or up to two host names
Up to two
CR-IR341 Service Manual
7 8 9 10
. . .
)
MU - 53
MU - 53