FujiFilm CR-IR341 Service Manual page 903

C 11 12
ONTENTS
3. NETWORK DATA: To Save Network-Related Setup File to FD
(1) Select "3. NETWORK DATA".
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO COPY NETWORK DATA FILES TO THE FD ?
1.YES 2.NO (DEFAULT=2) :
Meaning: Put a floppy disk into the floppy disk drive. Are you sure to copy the network
(2) Put the floppy disk into the floppy disk drive, and select "1".
Coping to the floppy disk is initiated, with the following messages displayed as files
are copied to the floppy disk.
XXXXXXXXXX IS COPIED.
XXXXXXXXXX IS COPIED.
.
.
.
XXXXXXXXXX IS COPIED.
Meaning: XXXXXXXXXX is copied.
When the floppy disk becomes full, the following message appears.
THE FD IS FULL. EXCHANGE OTHER ONE.
1.CONTINUE 2.CANCEL(DEFAULT=2) :
Meaning: The floppy disk is full. Replace it with another floppy disk.
Replace the floppy disk, and select "1".
Writing to the floppy disk continues, and once all the files are copied, the menu is
displayed.
For any file that cannot be written to the floppy disk, the following message appears.
FILE I/O ERROR. (FILE=XXXXXXXXXX)
XXXXXXXXXX denotes the file name.
The following files are saved to the floppy disk.
• RMT_SW.CFG
• DVICE
• CODEDSTB
• NETMASKS
009-051-05
11.20.99 FM2638
13 14 15 16
data to the floppy disk?
• EQUIP
• HOSTS
• ROUTE
• DICOM
CR-IR341 Service Manual
17
MU - 112
MU - 112