Table of Contents
Advertisement
C
11
12
ONTENTS
12. 7. FILE UTILITY: File Operation
File-related operation is performed. It is used when the configuration data is edited on a
personal computer.
12.1 1. FORMAT FD: Formatting FD
NOTES
• Before formatting a floppy disk, make sure that it does not contain any necessary data.
Once it is formatted, the data in the floppy disk is completely lost.
• If the floppy disk is "write-protected," it should be "write-enabled" before putting it into the
floppy disk drive. Under the "write-protected" condition, the floppy disk cannot be format-
ted.
1. FORMAT FD: To Format FD
(1) Select "1. FORMAT FD".
The following message appears.
PLEASE SET A FD. ARE YOU SURE TO FORMAT THE FD ?
1.YES 2.NO (DEFAULT=2) :
Meaning: Put a floppy disk into the floppy disk drive. Are you sure to format the floppy
(2) Put the floppy disk into the floppy disk drive, and select "1".
Once it is formatted, the following message appears.
FORMATTING THE FD IS COMPLETED.
Meaning: The floppy disk has been completely formatted.
If the formatting ends in error, the following message appears.
FORMATTING THE FD IS INCOMPLETED.
Meaning: The floppy disk formatting failed.
009-051-05
11.20.99 FM2638
13
14
15
16
disk?
CR-IR341 Service Manual
17
MU - 108
MU - 108
Advertisement
Chapters
Table of Contents
