1
2
C
ONTENTS
10.16 Replacing Lower Rubber Rollers of Subscanning Unit
(1) Remove the guide plate of the subscanning unit.
"10.15 Replacing Guide Plate of Subscanning Unit"
(2) Remove the SUS belt and rubber belt.
"10.11 Checking and Replacing SUS Belt/Rubber Belt/Tensioner"
(3) Remove the two respective screws that retain the bearings of the lower rubber rollers.
Lower rubber roller
Subscanning unit
(4) Pull out the two lower rubber rollers.
(5) Remove the two bearings and two wave washers.
(6) Attach to a new rubber roller the two bearings and two wave washers removed at step
(5).
(7) Reinstall the rubber roller in reverse order of removal.
009-051-04
05.31.99 FM2460
3
4
5
6
CR-IR341 Service Manual
7
8
9
10
(3)
BR M4x8, x4
Bearing
MC - 204
Bearing
Subscanning unit
MC - 204
FR1H1818.EPS