Table of Contents
Advertisement
C
1
2
ONTENTS
5. LOAD FROM FD: To Read or Write Content of Primary Memory
The shading, polygon, and sensitivity data in the floppy disk is loaded into the memory. It is
used when factory default data in the floppy disk is loaded, for example.
(1) Execute "5. LOAD FROM FD: 1. SHADING/POLYGON/2. SENSITIVITY".
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO LOAD SHADING/POYGON DATA FILES FROM THE FD?
1.YES 2.NO (DEFAULT=2) :
Meaning: A floppy disk should be put into the floppy disk drive.
(2) Put the floppy disk into the floppy disk drive and type in "1".
Once the file is loaded from the floppy disk, the following message appears.
XXXXXXXXXX IS LOADED.
If the process ends in error, the following message appears.
FILE I/O ERROR.(FILE=XXXXXXXXXX)
XXXXXXXXXX represents the file name.
6. SAVE TO FD: To Write Shading/Polygon/Sensitivity Data on Primary Memory to
FD
It is used when the shading, polygon, and sensitivity data is backed up.
(1) Execute "6. SAVE TO FD".
The following message appears.
PLEASE SET A FD.
ARE YOU SURE TO SAVE SHADING/POYGON & SENSITIVTY DATA FILES TO
THE FD?
1.YES 2.NO (DEFAULT=2) :
Meaning: A floppy disk should be put into the floppy disk drive.
(2) Put the floppy disk into the floppy disk drive and type in "1".
Once the file is saved to the floppy disk, the following message appears.
XXXXXXXXXX IS LOADED.
If the process ends in error, the following message appears.
FILE I/O ERROR.(FILE=XXXXXXXXXX)
XXXXXXXXXX represents the file name.
009-051-05
11.20.99 FM2638
3
4
5
6
Are you sure to load the shading or polygon correction data from the floppy
disk?
Are you sure to save the shading or polygon correction data to the floppy
disk?
CR-IR341 Service Manual
7
8
9
10
MU - 86
MU - 86
Advertisement
Chapters
Table of Contents
