FujiFilm CR-IR341 Service Manual page 162

C 1 2
ONTENTS
(2) Sequence of Load Conveyance
This is for the operation of the IP removal unit.
In order to load the IP into the cassette, the IP is conveyed to the grip rollers of the IP re-
moval unit.
Driving is performed collectively for the side-positioning conveyor and erasure conveyor
during "erasure conveyance."
Fig. 2.10.2 Load Conveyance
Preprocessing: Fig. 2.10.1
START
Is SB2 closed within TB22?
N
Y
Load conveyance stop
DRIVE (MF1/OFF) (soft)
DRIVE (MC1/OFF) (soft)
DRIVE (MB2/OFF) (hard)
DRIVE (SOLC1/OFF) (soft)
DRIVE (SOLF1/OFF) (soft)
END
Table 2.10.2 Operation Parameters
Symbol Description
TB22
Load timeout
009-051-04
05.31.99 FM2460
3 4 5 6
Value
2.9sec
TR1H0043.EPS
CR-IR341 Service Manual
7 8 9 10
Load conveyance stop
DRIVE (MF1/OFF) (soft)
DRIVE (MC1/OFF) (soft)
DRIVE (MB2/OFF) (hard)
DRIVE (SOLC1/OFF) (soft)
DRIVE (SOLF1/OFF) (soft)
MF1, MC1, MB2 excitation OFF
Level 0 error
03B2
Conveyance error
(during load conveyance)
Structure and Operation of Path Changeover Mechanism
The conveyance path of the before-side-positioning
conveyor is normally in the feed state.
Upon load request, the convergence path changeover
guide driving solenoid SOLC1 is turned ON to implement
path changeover.
After the IP has been passed (sensor SB2 is CLOSE
the solenoid is turned OFF to reset it to its original state.
Guide
when SOLC1
is OFF
SOLC1
SC2
IP path
Before-side-positioning
conveyor
MD - 99
FR1H0377.EPS
OPEN),
Guide
when SOLC1
is ON
SC1
IP path
MD - 99
FR1H0378.EPS